SMALL RECTANGULAR FIBERGLASS TANKS

Seamless fiberglass tanks, answering the pest and lawn care industry's requirement for small, high quality spray tanks. Tanks specifically engineered to meet and exceed the demands of lawn, tree and pest specialists.

Standard Features:   • Exclusive seamless reinforced fiberglass tank construction, eliminating seam or joint leakage (not a pasted, butt-jointed or bolted together tank.)   • High-gloss white gel-coat exterior finish protects against chemical and ultra-violet degradation for many years of maintenance-free service.   • Premium vinyl ester inner liner for increased chemical resistance.   • Backed up by written five-year limited warranty.   • Ball checks venting virtually eliminating tank leakage.

BAFFLES	MODEL#	DESCRIPTION
Tuflex's unique heavy duty baffling system reduces liquid surge within tank caused by vehicular movement.	153BA0100PC	Baffle, Model 0100PC
	153BA0150PC	Baffle, Model 0150PC
	153BA0200PC	Baffle, Model 0200PC
	153BA0300PC	Baffle, Model 0300PC
BULKHEADING OR COMPARTMENTING	MODEL#	DESCRIPTION
Bulk heading (compartmenting has been a Tuflex specialty for nearly half a century. Our painstaking process assures bulk head wall integrity thus avoiding contamination between tank compartments.	153BU0100PC	Bulk head, Model #0100PC (50 gal./50 gal.)
	153BU0150PC	Bulk head, Model#010PC (75 gal./75 gal.)
	153BU0200PC	Bulk head, Model# 0200PC (100 gal./100 gal.)
	153OBU0200PC	Offset Bulk head, Model #0200PC (115 gal./85 gal.)
	153BU0300PC	Bulk head, Model #0300PC (150 gal./150gal.)
	153OBU0300PC	Offset bulk head, Model #0300PC (190 gal./110 gal.)
	153BU0400PC	Bulk head, Model #0400PC (200 gal./200gal.)
	153OBU0400PC	Offset bulk head, Model #0400PC (300 gal./100 gal.)

SKID MOUNTING FRAME/SMALL TANKS
Tuflex's high strength/light weight frames are aluminum. Available for models:
PART#	DESCRIPTION
430BC0011	kid mounting frame assembly for Model 0100PC, mounting hardware and friction padding.
430BC0021	Skid mounting frame assembly for Model 0100PC same as above except including pump and engine platform.
430BC0031	Skid mounting frame assembly for Model 0150PC, consisting of pump and engine mounting platform, lifting eyes and four ½" threaded stainless steel attachment lugs laminated into tank wall.
430BC0041	Skid mounting frame assembly for Model 0200PC similarly equipped as described above.
430BC0051	Skid mounting frame assembly for Model 0300PC similarly equipped as described above.
150PUPL01	Pump and engine platform (fiberglass)

LARGE FIBERGLASS TANKS

High strength light weight chemical resistant fiberglass spray tanks are specifically designed and engineered to meet the LCO's demanding requirements of a truck mounted unit. **Custom color large tanks are available upon request (color sample required/four week lead time.)

Standard Features:   • Integral molded mounting base.   • 18" posi-lock access hatch.   • Baffled to reduce fluid surge.   • Four extra heavy duty steel tie down lugs, molded into tank wall for positive tank to truck mounting on Models 0500PC, 0600HX, 0800PC and 1200PC.   • Calibrated sight tube gallonage indicators.   • 2" double tapped plastic outlet fitting with stainless steel fasteners.   • High-gloss white gel-coat exterior finish protects against chemical and ultraviolet degradation for years of maintenance free service.   • Premium vinyl ester inner liner for increased chemical resistance.   • Ball check venting virtually eliminating tank leakage.

BULKHEADING OR COMPARTMENTING	MODEL #	DESCRIPTION
Today's LCO/PCO requires diversity and flexibility of their equipment. This is what a bulk headed (compartmented) tank can provide. Carrying more that one mixture on board allows an operator to tailor his application to customer requirements. Tuflex, through the use of our painstaking installation process, has eliminated the concern of intra-tank contamination. Mechanical agitation is available with any bulk headed Tuflex tank. Proper shaft alignment through bulk head(s) and tank ends is accomplished with the use of our unique laser level. This accuracy, taken at time of installation, means less bearing wear and lower maintenance costs over the life of the agitation system.	153BU0500PC	Bulk headed, single wall
	153BUA0500PC	Bulk headed, single wall with double stuffing box housing
	153CBU0500PC	Bulk headed, double wall cored with double stuffing box housing
	153BU0600PC	Bulk headed, single wall
	153BU0600HX	Bulk headed, single wall
	153BUA0600/800HX	Bulk headed, single wall with double stuffing box housing
	153CBU0600/800HX	Bulk headed, double wall cored with double stuffing box housing
	153BU0800PC	Bulk headed, single wall
	153BUA0800PC	Bulk headed, single wall with double stuffing box housing
	153CBU0800PC	Bulk headed, double wall cored with double stuffing box housing
	153BU01200PC	Bulk headed, single wall
	153BUA01200PC	Bulk headed, single wall with double stuffing box housing
	153CBU01200PC	Bulk headed, double wall cored with double stuffing box housing

BU MODEL	BUA MODEL	CBU MODEL
Single wall bulk head creating two separate compartments. Compatible for mechanical agitation systems.	Single wall bulk headed with shaft housing and two stuffing boxes. This housing assures absolute tank integrity where shaft passes through bulk head. A 5" access hole is located in tank bottom allowing sufficient room to service stuffing boxes. In the event of packing seepage in stuffing box the access hole will allow leaking material to become evident and repair measures can be taken.	Double wall cored bulk head with shaft housing and two stuffing boxes. This is our finest version and assures complete bulk head wall integrity eliminating any chance of intra-compartment contamination of materials. As in BUA models the CBU has a 5" access hole in the bottom to service stuffing boxes of mechanical agitation if required.

PUMP AND ENGINE COVERS	PART #	DESCRIPTION
Pump and engine covers serve to protect the pump, engine or drive train from direct exposure to the elements while enhancing the sprayer's design.	159CVR500C	Pump and engine cover Model 0500C 35 ¼" long
	159CVR500PC	Pump and engine cover Model 0500PC 38 ¼" long
	159CVR600/800HX	Pump and engine cover Model 0600HX 31" long
	159CVR8/12PC	Pump and engine cover Model 0800/1200PC 44" long

SKID MOUNTING FRAME/LARGE TANKS	PART #	DESCRIPTION
Heavy duty Tuflex frame designs offer complete support for their respective design tanks. Primed and painted to a satin black finish, all frame units include tank to frame fasteners, tank friction padding to eliminate chaffing and pump and engine mounting platform	430CC0041	Skid mounting frame Model 0500PC
	430CC0051	Skid mounting frame Model 0600HX
	430CC0061	Skid mounting frame Model 0800PC
	430CC0071	Skid mounting frame Model 1200PC

BULKHEADING OR COMPARTMENTING	MODEL #	DESCRIPTION
Two of Tuflex's specialty design tanks lend themselves to bulk heading. Model 100CL and Model 1200C.	153BU0100CL	Bulk headed, Model 0100CL
	153BU1200C	Bulk headed, single wall, Model 1200C
	153BUA1200C	Bulk headed, single wall with double stuffing box housing, Model 1200C
	153CBU1200C	Bulk headed, double wall cored with double stuffing box housing, Model 1200C

SKID MOUNTING FRAME/SPECIALITY TANKS	PART #	DESCRIPTION
Our heavy duty skid mounting frames are available for Models 0500C and 0600U tanks. As in our large tank designs these frames include tank to frame fasteners, tank friction padding to eliminate tank chaffing and pump and engine mounting platform.	430CD0011	Skid mounting frame, Model 0500C
	430CD0021	Skid mounting frame, Model 0600U

STATIONARY USE LIQUID STORAGE TANKS
Our line of stationary tanks is available in the same shapes as our portable tanks. These high strength, light weight chemical storage tanks are fabricated entirely of isophthalic resin and are specifically engineered for stationary liquid storage only. These tanks will not function in portable, trailer or truck mounted applications.

MODEL #	CAPACITY	DIMENSION L x W x H	HATCH SIZE
0100PCS	100 gal.	36 x 30 x 24	7 ½
0150PCS	150 gal.	52 x 20 x 34	12
0200PCS	200 gal.	64 x 31 ¼ x 27 ¼	7 ½
0300PCS	300 gal.	64 ½ x 31 5/8 x 40 1/8	7 ½
0500CST	500 gal.	72 x 48 x 52	18
0500PCST	550 gal.	81 x 48 ½ x 47 ½	18
0600HXST	650 gal.	83 ½ x 47 3/8 x 52	18
0600UST	600 gal.	76 x 55 ½ x 50	18
0800PCST	875 gal.	80 x 60 x 58	18
1200PCST	1200 gal.	108 x 60 x 58	18
1500CVST	1500 gal.	96 x 96 x 48	18
2200CVST	2200 gal.	96 x 96 x 84	18