| Model #: |
FMC SURGE TANK |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Fmc Surge Tank |
| Description: |
FMC John Bean surge tank |
|
|
| Model #: |
UDOR #6010.24 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Udor Control Unit01 |
| Description: |
Udor pump or remote mounted control unit with adjustable pressure regulator with manual dump lever. Includes two ½” ball valve discharge ports & pressure gauge.
Udor unit # 6010.24
Repair kit #: 8701.10 |
|
|
| Model #: |
UDOR #6010.24/LP |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Udor Control Unit02 |
| Description: |
Udor - same as 6010.24 except regulator is fitted with a lighter spring & gauge for lower pressure applications.
Udor unit # 6010.24/LP
Repair kit #: 8701.10 |
|
|
| Model #: |
UDOR #6047.06 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Udor Control Unit03 |
| Description: |
Udor pump or remote mounted control with right angle entry from main body to adjustable pressure regulator for smoother operation & longer life. Includes manual dump lever, two ½” ball valve discharge ports & pressure gauge.
Udor unit # 6047.06
Repair kit #: 8701.02 |
|
|
| Model #: |
UDOR #6005.15 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Udor Pressure Regulator |
| Description: |
Udor high volume adjustable brass pressure regulator with master on/off lever, ¾” male BSP inlet port, ¼” gauge port & 1” hose barb bypass port.
Udor unit # 6005.15
Repair kit #: 8701.03 |
|
|
| Model #: |
HYPRO #9910-GS40GI |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Hypro Control Unit01 |
| Description: |
Hypro #9910-GS40GI
Control unit for D30 & D50
Control unit for mounting on D30 and D50.
Includes pressure gauge, one adjustable high pressure relief valve, one complete bypass lever, two ½” HB outlets with individual shut-offs and ¾” hose barb bypass.
|
|
|
| Model #: |
HYPRO #KIT_1640 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Hypro Gear Case01 |
| Description: |
Gear case for 9910-D30
6:1 gear box, for standard 5.5 HP gas engine with ¾” shaft
|
|
|
| Model #: |
HYPRO #KIT_1642 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Hypro Gear Case02 |
| Description: |
Gear case for 9910-D50
6:1 gear box, for standard 8-18 HP gas engine with 1” shaft
|
|
|
| Model #: |
HYPRO#A_3300_0088_C1 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Hypro Control Unit02 |
| Description: |
Control unit for D70 |
|
|
| Model #: |
HYPRO#9910-KIT1701_G |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Hypro Shaft & Base Kit |
| Description: |
1” sold shaft and base kit for Hypro 9910-D30 pump |
|
|
| Model #: |
HYPRO #TC_300126 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Hypro Strainer Basket |
| Description: |
Strainer basket for 8”, 12” and 16” rims |
|
|
| Model #: |
HYPRO#GG1000 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Hypro Pressure Gauge |
| Description: |
Hypro pressure gauge |
|
|
| Model #: |
815STRN001 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Tuflex Line Strainer01 |
| Description: |
3/4" nyglass
Mesh size: #40
Normally installed on the suction (inlet) side of a pump system, line strainers protect the system from large particulate matter which may cause system failure due to fouled check valves or clogged spray tips.
• Available from ½” through 2” with a variety of mesh sizes.
|
|
|
| Model #: |
815STRN002 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Tuflex Line Strainer02 |
| Description: |
1" nyglass
Mesh size: #40
Normally installed on the suction (inlet) side of a pump system, line strainers protect the system from large particulate matter which may cause system failure due to fouled check valves or clogged spray tips.
• Available from ½” through 2” with a variety of mesh sizes.
|
|
|
| Model #: |
815STRN003 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Tuflex Line Strainer03 |
| Description: |
1 1/4" nyglass
Mesh size: #20
Normally installed on the suction (inlet) side of a pump system, line strainers protect the system from large particulate matter which may cause system failure due to fouled check valves or clogged spray tips.
• Available from ½” through 2” with a variety of mesh sizes.
|
|
|
| Model #: |
815STRN004 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Tuflex Line Strainer04 |
| Description: |
1 1/2" nyglass
Mesh size: #20
Normally installed on the suction (inlet) side of a pump system, line strainers protect the system from large particulate matter which may cause system failure due to fouled check valves or clogged spray tips.
• Available from ½” through 2” with a variety of mesh sizes.
|
|
|
| Model #: |
BANJO LINE STRAINER |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Banjo Line Strainer |
| Description: |
Banjo polypro line strainer with bottom drain plus
Normally installed on the suction (inlet) side of a pump system, line strainers protect the system from large particulate matter which may cause system failure due to fouled check valves or clogged spray tips.
|
|
|
| Model #: |
UDOR SHAFT ADAPTER |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Udor Shaft Adapter Kit |
| Description: |
Udor 7751.A1 shaft adpter kit
1" solid shaft with mounting rails |
|
|
| Model #: |
UDOR SHAFT ADAPTER2 |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Udor Shaft Adapter2 |
| Description: |
Udor A6 shaft adapter kit
1-3/8", 6-spline male PTO shaft |
|
|
| Model #: |
FMC PRESSURE REG. |
| Category: |
Pumps |
| Sub-Category: |
Pump Accessories |
| Product Name: |
Fmc Pressure Regulator |
| Description: |
FMC John Bean Pressure Regulator
Max 40 GPM, 50-800 psi
3/4" NPT inlet and outlet ports. 3/4" NPT overflow.
Used on R10 and R20/20 FMC John Bean Piston Pumps.
|
|
|
.jpg)
.jpg)
.jpg)
